First Governor of Vermont
'Thomas Chittenden' is a life-size, dark brown patina, bronze statue located outside the west wing of the Vermont State House in Montpelier, Vermont.
It was created by renowned sculptor Frank Chalfant Gaylord II (1925 - 2018) of Barre, Vermont. Gaylord is best known for the Korean War Memorial in Washington, DC. 'Thomas Chittenden' was dedicated on 6/18/99.
Chittenden (1/6/1730 - 8/25/97) was a major figure in the early history of Vermont as the first leader of the territory for nearly two decades. When Vermont became a state, he became the first Governor.
This sculpture sits upon a granite pedestal. The sculpture and pedestal are in excellent condition with only minor oxidation on the bronze - two small patches of blue-green - indicating a pinhole size pit or hairline crack in the patina where air has seeped through and oxidized the underlying bronze.
There is a light green tinge over the entire surface of the sculpture. This is mild copper oxidation, typical of outdoor sculpture that has not received a periodic protective coating.
Why coat bronze at all? After all, it's a very durable metal.
The importance of coating bronze or any metal sculpture is to protect against conditions that can harm the metal surface, especially bird droppings, coastal salt air, and acid rain.
First, I cleaned the surface by removing all dirt and oxidation with a mild soap and distilled water. I use Orvus which is a very mild detergent and biodegradable. Traditionally used to clean horses, Orvus is pH neutral and recommended by art conservators.
Next I prepared for coating the sculpture by covered the granite pedestal and surrounding landscaping with protective plastic. The coating is solvent-based so it will discolor granite and damage plant life. I applied the coating with a horsehair brush since the polymer dissolves plastic brush bristles.
I use a product known as Everbrite. It has been used to coat outdoor metal sculpture for over 30 years. It far exceeds the protective properties of wax, lasting as long as 10 years. It is removeable with solvent, but unlike wax there is no need to remove past coats. Additional coats can be applied right over previous ones.
It comes in clear, matte, and satin finish, and the manufacturer will create custom mixes if you need to match surfaces more precisely.
Everbrite is easy to apply needs no special skills or expensive conservators.
I applied 2 coats. It dried within an hour. I'll check on it yearly for five years at no extra charge as part of my guarantee.